|
Download PDF
ZonePod can accommodate an extensive range of sensor options to
fulfil a whole host of monitoring requirements. Apart from setting
high and low alarm thresholds for the temperature and humidity sensors
no additional configuration is required.
The sensors are supplied with an interface cable
of 0.2m or 5m and additional extender cable lengths are also available.
Typical Applications
Temperature monitoring in computer rooms to provide early warning
of air conditioning failure.
Smoke monitoring in all kinds of environments where 24-hour notification
is required.
Leak detection in retail outlets, restaurants etc where an overnight
leak could have a catastrophic effect.
Power monitoring where standby power is available but knowledge
is required regarding when power failures occur, and duration of
outages.
Humidity monitoring where condensation can seriously affect the
operation of electronic equipment.
ZonePod Specifications:
Available Sensors:
- Temperature
- Humidity
- Smoke
- Water leak detection
- Power
- Security
- Universal
Thresholds
High / Low thresholds configurable on temperature and humidity sensors.
Open / Closed configuration option for all other sensors (auto set-up
for sensors other than the universal sensor)
Configuration
Direct configuration via 5-button keypad and screen
Monitoring
On screen monitoring (either through sensor type or sensor reading,
user configurable)
Alerts
Via voice or SMS messaging. 4 programmable messages along with a
common message. Ports 1, 2 and 3 have individual messages and 4,
5 and 6 use a group message.
LEDs
Green and red for each port. The following factors apply:
| Green
LED |
Red
LED |
Meaning |
| Off |
Off |
No sensor |
| On |
Off |
Sensor Normal |
| Off |
On |
Sensor Low |
| On |
On |
Sensor high/ alarm |
Dimensions (mm) 279 (H0 x 197 (W) x 40 (D)
ZonePod Key Features:
- Monitors up to 6 environmental sensors in any combination
- Wide range of sensors including temperature, humidity, smoke,
water leak, power, security, air conditioning, fire panel, etc
- Voice message and SMS text alerts can automatically be sent
to up to 10 recipients when an alarm occurs.
- 4 types of alarm message can detail site location and specific
alarm information (user configurable)
- Integrated LCD display show sensor types connected and status
- “Alarm” and “Normal” status LEDs for
each sensor
- Uses standard telephone line
- Password protection for alert facility
- Alarm restored messages to notify that conditions have returned
to normal
- Automatic line status reporting.
- High / Low user configurable warning thresholds for temperature
and Humidity
- Easy to use on-board menu facility for out-of-the-box operation
- Dialler override facility to disable voice and text alerts when
required
- Different alarm types sent to different personnel
- Alarm event history log
- Remote dial-in facility to “listen in” to most recent
alarm messages
Step 1: Plug-in sensors to ZonePod
Step 2: Configure required thresholds for temperature / humidity
sensors (if used)
Step 3: Record alarm messages and input required detail for text
messages
Step 4: Input required telephone numbers
Step 5: Connect ZonePod to telephone line
Step 6: Turn dialler override off
ZonePod can be wall-mounted using the cutout slots on the rear
of the unit. Individual alarm messages can be configured for sensor
ports 1, 2, 3 and a “group” message for ports 4, 5,
and 6.
The versatility of ZonePod means that in effect it can be used
in a wide variety of environments. Sensors can be connected in any
combination for maximum flexibility. This makes it a perfect solution
for both small and large organisations alike.
Download PDF
Call 0870 300 9560 for more information or alternatively
Click Here to contact
us.
|